Beurer UB 190 CosyNight Instrucciones De Uso página 18

Setting the temperature
Press the button to set the temperature setting for the body area [3].
Press the button to set the temperature setting for the foot area [5].
Setting 0: Off
Setting 1: Minimum heat
Setting 2 – 8: Individual heat
Setting 9: Maximum heat
NOTE:
• Switching sequence of the temperature settings:
0 – 9 – 8 – 7 – 6 – 5 – 4 – 3 – 2 – 1 – 0 – 9, etc
WARNING
If the heated underblanket is being used over several hours, we recom-
mend that you set or program the lowest temperature setting on the
controller to avoid overheating the person using the blanket.
NOTE:
• The fastest way to warm up the heated underblanket is to initially set the highest temperature setting.
• We strongly recommend switching on the heated underblanket approx. 30 minutes before going to
bed and covering it with the duvet in order to prevent heat loss.
Selecting automatic switch-off time
Press the button to set the automatic switch-off time [4]. You can set the automatic switch-off time to 1, 2,
3, 4, etc. up to 12 hours.
NOTE:
• Switching sequence of the automatic switch-off time:
1 h – 12 h – 11 h – 10 h – 9 h, etc. 1 h – 12 h – 11 h, etc. (time in hours).
The heated underblanket is automatically switched off once the set switch-off time has elapsed.
The following is then shown in the display:
Temperature setting for body area: 0
Temperature setting for foot area:
Automatic switch-off time:
To switch on the heated underblanket again, press either the button to set the temperature setting for the
body area [3] and/or for the foot area [5].
If you do not want to use the heated underblanket beyond the selected switch-off time, slide the ON/OFF/
REMOTE switch to the OFF (0) position to switch off the heated underblanket.
Switching off
To switch off the heated underblanket, slide the ON/OFF/REMOTE switch on the controller to the OFF (0)
position.
When switched off, the illumination and the display are turned off.
NOTE:
• If the heated underblanket is not being used for several days, set the ON/OFF/REMOTE switch to the
OFF (0) position and remove the mains plug from the socket.
0
0
18