Introduction; Features; Getting Started; Usb Player - Phonic MX300USB Manual Del Usuario

INTRoDUCTIoN

Congratulations on your purchase of a Phonic MX DJ mixer
– MX300 USB or MX300 USBW. Now using your Phonic DJ
mixer, you'll be able to hit a break, add a sample or just run
beat under your tracks with more ease and versatility than
ever before. The USB port allows for immediate playback of
MP3 and WAV files directly from USB flash drives. You can
also pull tracks directly from your phone, tablet or notebook
computer using the MX300 USBW's Bluetooth function.
In order to get the most out of your MX300 USB or MX300
USBW DJ mixer, please read this user's manual – including
all safety instructions – carefully before use. After reading
through this owner's manual, keep it in a safe place for
future reference.

FEaTURES

• Channels 1 to 3 on the front panel switchable between
phono, mic or line
• Incorporate MP3 and WAV files into the mix via onboard
USB playback function
• Stream audio directly from Bluetooth-enabled devices
such as cellphones, tablets and notebooks (USBW only)
• Bluetooth function of the MX300USBW's is also
compatible with Phonic BTM-10 and BTM-20 Bluetooth
microphone kits
• Mic 1 microphone-input via unbalanced XLR-socket on
the front panel
• Mic 2 and 3 microphone-input via unbalanced 1/4" jacks
on the back panel
• Separate tone controls (bass, middle, treble) on each
channel for greater control over highs, mids and lows
• Ultra-slick crossfader for mixing channels 1, 2 and 3
through crossfader assign button
• 2 beat-indicators by the crossfader for perfect mixing
• 3 LED level meter display (master out and cue level)
• Headphones-connection on the front panel with its own
independent level control
• Additional cue-split/cue-mix button
• Mix headphone signal through cue-mixing fader
• Output signal adjustable via master-control and balance-
control
• Master, booth and record outputs via stereo RCA jacks
• Record output independent from master-level
• Separate controllable monitor output for connecting active
speakers or additional amplifiers
MX300USB / MX300USBW

GETTING STaRTED

1. Before turning the power on, set the Master output
control on each channel all the way down.
2. Always turn the power off before connecting or
disconnecting cables.
3. Check the AC Voltage before connecting the AC plug.

USB pLaYER

1. Ensure the Channel 3 / USB button is pushed in to
allow channel 3 to accept the USB player's signal.
2. Connect a USB flash drive to the USB port on the front
panel of the MX300 USB or MX300 USBW.
3. Wait a couple of seconds while the USB player
initializes the USB drive.
4. Push the Play / Pause button to start playback
5. Playback will start from the first track, where files are
ordered in 'numerbetical' order.
Please note that the maximum possible bit rate for playback
of tracks is 320 kbps.

BLUETooTH CoNNECTIVITY

The MX300 USBW features built in Bluetooth connectivity
that allows connection to any modern cellphone, tablet
computer or laptop that has a Bluetooth interface. Signals
from the Bluetooth connection are sent directly to the
channel 1 mix when "Bluetooth" is selected on the Channel
1 / Bluetooth select switch. To establish a connection
between your MX mixer and your Bluetooth device, do
the following:
1. Push the Channel 1 / Bluetooth button in to ensure the
Bluetooth signal is assigned as the channel 1 source.
2. Search for and pair with "Phonic.BT" in the Bluetooth
setup menu of your cell phone, tablet, PC, or other
Bluetooth-enabled device.
3. If your device asks for a password, please enter "0000".
4. Audio signals received through the Bluetooth interface
will be routed to channel 1 on the mixer.
5. If you cannot connect to the Phonic's Bluetooth input,
it might be because it is already connected to another
device or someone has erroneously connected to it.
Please restart your MX mixer and attempt the Bluetooth
connection again.
6. When using smartphones and tablets, we advise that
you turn on "Airplane Mode" or "Flight Mode" to stop
phone calls or push notifications from interrupting your
audio.
NoTE: Not all Bluetooth-enabled devices allow for use of external
audio playback. In the case of laptops in particular, Bluetooth may
be used for data transmission only. This is a limitation of these
devices and you will not be able to use the MX300 USBW with
these devices.
1