Maintenance; Technical Data; Accessories / Spare Parts - Velp Scientifica OHS 200 ADVANCE Manual De Instrucciones

10. Maintenance

➢
No routine or extraordinary maintenance is necessary;
➢
Repairs must be carried out by authorized Velp personnel only;
➢
Instrument must be transported in its original packaging any indications present on the original packaging must
Maintenance
be followed (e.g. palletized);
➢
It is the responsibility of the user, to properly decontaminate the unit in case of hazardous substances
remaining on the surface or interior of the device. If in doubt about the compatibility of a cleaning or
decontamination product, contact the manufacturer or distributor.
➢
Disconnect the unit from the power supply and use a cloth dampened with a non-flammable non-aggressive
Cleaning
detergent.

11. Technical data

Models
Power supply
Dimensions (WxHxD)
Weight
Power input
General
Construction material (structure)
features
Working in continuous
Settable restart modality
Noisiness
Environmental temperature admitted
Storage temperature admitted
Max humidity
Level of electrical protection CEI EN60529
Overvoltage category
Pollution degree CEI EN61010-1
Max altitude
Stirring capacity
Programmable speed
range
Stir
Motor type
Speed selection
Stirring alarm
Motor rating output
Torque Max torque admitted
Counters Motor counter

12. Accessories / Spare parts

A00000002 Probe extension cable, length 1 m
A00000363 Glass Temperature Probe OHS Advance
A00000366 Support rod and base OHS
A00000369 Telescopic support rod and base OHS
A00000391 OHS/ControllerSoft
A00000372 Support rod for probe
A00001300 Support rod and base
A00001301 Double clamp
A00001302 Ribbon clamp
A00001304 Stirring shaft with floating blade
A00001305 Stirring shaft with folding blade
F20100480, F20100481,
F20100482
230 V / 50-60 Hz (+/-10%)
90x315x235 mm
OHS 200
(3.54x12.40x9.25 in)
90x285x235 mm
OHS 100 – OHS 60
(3.54x11.22x9.25 in)
4,6 kg (10,14 lb)
OHS 200
4,1 kg (9,04 lb)
OHS 100
4,1 kg (9,04 lb)
OHS 60
190 W
Aluminum
Admitted
Stop or work
<< 60 dBa
+5...+40 °C
-10...+60 °C
80%
IP 54
II
2
2000 m
OHS 200 100 l H
OHS 100 100 l H
OHS 60 40 l H
6-400rpm (I) – 30-2000rpm (II)
OHS 200
OHS 100 30-1300rpm
OHS 60 30-2000rpm
BLDC
1 rpm step
Motor fault
150 W
200 Ncm (I) – 40 Ncm (II)
OHS200
OHS100 100 Ncm
OHS60 60 Ncm
Working hours
18
O
2
O
2
O
2
A00001306 Stirring shaft with fixed blade
A00001307 Stirring shaft with propeller
A00001308 Stirring shaft with paddle, 6 holes
A00001309 Stirring shaft with turbine
A00001310 Stirring shaft with turbo propeller
A00001311 Stirring shaft with anchor
A00001312 Stirring shaft protection OHS
10007175 Knob 35D blue
40002632 Pt100 probe Ø 3 OHS Advance with cable
F20110480, F20110481,
F20110482
115V / 60 Hz (+/-10%)
90x315x235 mm
(3.54x12.40x9.25 in)
90x285x235 mm
(3.54x11.22x9.25 in)
4,6 kg (10,14 lb)
4,1 kg (9,04 lb)
4,1 kg (9,04 lb)
190 W
Aluminum
Admitted
Stop or work
<< 60 dBa
+5...+40 °C
-10...+60 °C
80%
IP 54
II
2
2000 m
100 l H O
2
100 l H O
2
40 l H O
2
6-400rpm (I) – 30-2000rpm (II)
30-1300rpm
30-2000rpm
BLDC
1 rpm step
Motor fault
150 W
200 Ncm (I) – 40 Ncm (II)
100 Ncm
60 Ncm
Working hours