Maintenance And Servicing - Temper KEB-16400C Manual De Instrucciones

KEB 16400C
Battery Crimping Tool

MAINTENANCE AND SERVICING

Damaged equipment may cause serious personal injury. Do not use damaged
equipment. If abnormal noise or vibration occurs, have the problem corrected before
further using.
1. Before each using, inspect the general condition of the tool. Check for loose screws,
misalignment or binding of moving parts, cracked or broken parts, or any other
condition that may affect its safe operation.
2. After using, clean external surfaces of the tool with clean, moist, smear the rust
preventing oil on the metal surface of the tool and the dies to avoid rusty. Store the
tool in the dry environment.
3. Service to the tool should only be done by a qualified Service Technician.
4. In order to prolong the life of the tool please change the oil per year. Make sure the oil
filtered by 120 mesh net or over 30µm strainer. Meantime avoid the dusty into the oil
cup.
5. After a long time using, the sealing kits will be damaged, if there is leakage please
contact with the manufacturer and/or the distributor to change the sealing kits.
6. If the tool not used for a long time, please make sure the piston stay on its starting
position, clear up the tool and paint the rustproof oil both to the tool piston and
accessories. Take out the battery and put them into box and store the tool in a dry
surrounding. As following:
www.grupotemper.com