Listening To Stored Stations; Scanning All Receivable Stations (Scan) - Blaupunkt St. Louis MP56 Instrucciones De Manejo E Instalación

➔
Press the softkey for approx.
two seconds to which you
want to assign the station.
The station is stored. A signal
tone confi rms that the station
has been stored. The frequency
or the name of the station
displayed next to the softkey.
The current station is highlighted.
Note:
To automatically search for
FM stations and store them in
the FMT memory bank, see
"T-STORE" on page 28.
Listening to stored
stations
➔
Select the desired memory
bank (see page 23).
The tuner display displays the
frequencies or names of the
six stations C
7
softkeys to
ry bank.
➔
Briefl y press the softkey which
is assigned to the station you
want to set up.
The frequency or the name of
the current station is indicated.
The selected station is played
back provided that it can be re-
ceived at the current vehicle
position.
The frequency or name of this
station appears on the main
C
is
assigned to the
<
in this memo-
A
line if the station provides
this RDS information. In addi-
tion, the memory location of
the radio station
high lighted.
Scanning all receivable
stations (SCAN)
➔
Select the waveband (FM, AM)
whose receivable stations you
want to scan (see page 27).
➔
Press and hold the OK button
A
for approx. two seconds.
The tuner searches for stations
in the current waveband. The
A
main line displays "SCAN"
every two seconds.
As soon as the tuner has locat-
ed a station, it is played and
the station name or the station
frequency appears on the main
A
line . The scan time can be
set as described on page 55
and 57 under "SCANTIME".
After the frequency band has
been completely searched
once, the search stops and the
station located last is played
back.
You can do the following at any
time:
•
Store the currently scanned
station (see page 25).
•
Cancel the scan by briefl y
pressing the OK button
Operating the tuner
C is
A
.
25