Time Format - Velleman CCTVPROM10 Manual Del Usuario

7.3.4.1 LANGUAGE
To change the system language:
1) From the drop-down menu select ENGLISH, or CHINESE.
2) Click APPLY. Click SURE in the confirmation window.
3) Click EXIT to close the menu.
NOTE: The device will restart when you finish system language setup.
7.3.4.2 DATA/TIME
It is highly recommended to immediately set the date and time when first setting up your system.
To set the date and time:
1) Click DATE/TIME and configure the following options:
o DATE: Enter the day, month, and year.
o DATE FORMAT: Select DD/MM/YYYY, MM/DD/YYYY, or YYYY/MM/DD
o TIME: Enter the time
o TIME FORMAT: Use the drop-down menu and select 12HOURS or 24HOURS
o DST: Use the drop-down menu to select ON/OFF to enable/disable Daylight Savings Time
2) Click MODIFY DATE AND TIME. Click SURE in the confirmation window.
3) Click APPLY. The new date and time are saved.
Daylight Savings Time
To set daylight savings time:
1) Under DST, select ON. DST options appear.
2) Under DST MODE select one of the following:
o CUSTOM: Set customized start and end times for DST (go to step 4)
o DEFAULT: The Default setting will apply DST from the second Sunday of March to the
second Sunday in November (go to step 3)
3) If using the DEFAULT, click APPLY.
4) If setting a CUSTOM DST, use the drop-down menus to select a week and month for the start
and end times.
5) Click APPLY. Click SURE in the confirmation window.
6) Click EXIT in each menu until all windows are closed.
7.3.4.3 PASSWORD
When you first start up your system, you are technically logged in as the ADMIN under Device
ID000000. The system allows two user authorities connected to a Device ID. The authorities are as
follows:
o ADMIN—administrator: has full control of the system, and can change both administrator and user
passwords and enable/disable password checking
o USER—normal user: only has access to live viewing, search, playback, and other limited
authorities.
For security reasons, it is highly recommended to enable passwords on your system. If you enable
passwords, you must select a 6-digit USER password and a 6-digit ADMIN password.
12/04/2011
CCTVPROM10
11
©Velleman nv