Cleaning The Tester; Important - Egatronic 51250 Manual De Instrucciones

a. switch-off the Tester and remove all the test leads.
b. release the screw in bottom part,and open battery compartment.
c. Replacing all old battery (6) with new battery.
d. After replacing the battery, rejoin the battery compartment and firmly screw.
Remove all the batteries if the Tester do not use for a long time, so that it avoid the leakage and
corrosion in the battery compartment.

7.1.2 Cleaning the Tester

Soft cloth and mild detergent should be used to clean the surface of the Tester, because solvent
will corrosive the display.
7.1.3 Must be avoiding moisture.
7.2 Repair
7.2.1 Contact our after-sales service department or agents when the following thing happens:
a. The Tester is being damage.
b. LCD display abnormal.
c. Unreasonable deviation when in normal use.
d. Buttons do not function properly and confusion.
7.2.2 when the Tester needs repair, please bring it to the professional technician or
authorized repair department for repair.

IMPORTANT!

The maker will not take responsibility for damage or malfunction as a result of the device being
incorrectly used or, applied for a purpose for whith it was not intended.
According to Waste Electrical and Electronic Equipment directive (WEEE), these ones must
be collected and arranged separately. If you have to throw them out, please, do not use the usual
rubbish. Please, contact your distributor for free recycling.
The maker guarantees to the device owner 12 months against any manufacture defect.
This guarantee do not cover the parts wich are consumables.
Note: to apply the guarantee its necesary to send the "GUARANTEE CERTIFICATE" duly filled
within one week after purchased the machine to the maker.
NOTES
GUARANTEE
19