Melchioni iSpot 10W Manual De Instrucciones página 12

En
10W/20W LED Floodlight
important User Advice
This Product is Class I and must be Earthed.
Always switch off mains supply before fitting.
Replace any broken or damaged glass as soon as possible.
Ensure all seals are intact and operational after fitting or maintenance.
Do not touch the lamp in use or just after use as there is a risk of being burnt.
Do not cover it with paper or cloth.
Take off from flammable materials.
Do not wash the lamp.
Do not use the lamp where the ambient temperature is over 45°C.
Keeping your eyes with a security distance, the light could cause damage.
installation
Find a suitable location to install this product. Prepare the mains wiring.
Use the mounting bracket to mark the hole centres for fixing.
Drill holes suitable to accept wall plugs.Insert wall plugs.
Ensure mounting bracket.
Terminate wiring. Pay particular attention to any markings for Repalce all covers.
Fit the floodlight to the mounting bracket with the screws,
Check seals, gaskets and cable gland operation before testing the luminaire.
Turn on power supply and test luminaire.
Maintenance
This product has no user serviceable parts.
Clean with a damp cloth and dry with a lint free cloth or kitchen towel.
important infomation
It is recommend that luminaires installed and fitted by a qualified electrican ensuring
the installation complies to the current building regulations.
These products are designed for connection to a 230VAC 50Hz supply.
Any broken or damaged parts should be replaced as soon as possible.
The supplier will not accept responsibility for any claims arising from a poor installation.
Direct Chassis (E)
Brown (L)
Blue (N)
Live: Brown or Red
Earth: Green/Yellow
Neutral: Blue or Black