CASUALPLAY S4 Instrucciones De Uso página 12

• The front wheel will release itself and automatically remain fixed (fig. 02). Check
it is fastened.
• Check that the safety anchor remains in the position shown in the photo (fig. 03 - 05).
Attaching the wheels (see illustrations 06 - 09)
• To mount the rear wheel, insert the wheel's stud bolt in the socket by processing
continually on the button and check the wheel has been correctly mounted by
spinning it (fig. 06).
• To mount the back wheel place the axis of the chassis in the wheel socket (fig. 07).
• To remove the back wheels press the button on the centre of the wheel and pull
it out (fig. 08).
• To remove the front wheel press the button located under the wheel socket and
pull the wheel out at the same time (fig. 09) (Mod. S4/S6).
Footrest (see illustrations 10 -12)
• To extend the footrest, lift the bottom of the seat upwards and follow the steps
(fig. 10 - 12).
Operating the brake (see illustrations 13 - 14)
• Phus down firmily to apply (fig. 13). After applying the brake chek it by gently rock-
ing the pushchair backward and forward. Lift to release. The provisional hand-
brake can also be used (fig. 14).
CENTRE ThE BRAKE (ACCORDING TO ThE MODEL): TURN ThE KNOB (FIG. 15).
harness adjustment and fastening the buckle (see illustrations 16 - 18)
• To fasten the buckle (fig. 16 - 17) place part A inside part B by pressing untill you
hear a "click" sound (fig. 18). To open press the mail buckle sides and pull it out.
Restraint
• The harness is attached to the seat unit. Ensure the straps are adjusted to the size
of your child using adjusters C (fig. 18), and that the waist belt is fed through the
crotch strap as shown.
Assembling the pushchair padding (ACCORDING TO ThE MODEL) (see il-
lustrations 19 - 22)
• Remove the cushions from the seat cover (fig. 19).
• Open the buckle (fig. 20).
• Place the mat on the pushchair and run the harness straps through the openings
10