Storage; Troubleshooting; Disposal Of The Appliance - AquaPur ADR 1300 B3 Instrucciones De Uso

Storage

1) Store the cleaned and dryed appliance at a clean and dust-free location.
2) Wrap the power cable around the attached water tank and secure the end
with the yellow clip on the power cable.

Troubleshooting

PROBLEM
The appliance does
not function.
It will not produce
steam.
The green control
lamp 7 lights up and
then goes out again.
The steam volume is
low.
Water drips from the
steam nozzle 0.

Disposal of the appliance

Do not dispose of this appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2002/96/EC.
Dispose of the appliance through an approved disposal centre or at your
community waste facility. Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal centre.
ADR 1300 B3
POSSIBLE
CAUSE
The plug is not con-
nected to the mains
power supply.
The appliance is dam-
aged.
The switch "Anti-calc
Function" 4 is at the
position "I".
The water tank 3 is
empty.
The appliance is not yet
heated up.
There is no defect: the
temperature fell briefl y
and the appliance was
then heated up again.
The temperature is too
low.
The appliance is scaled
up.
The switch "Anti-calc
Function" 4 is at the
position "I".
The temperature is too
low.
POSSIBLE
SOLUTIONS
Connect the appliance
to a mains power socket.
In this case, contact
Customer Services.
Place the switch "Anti-calc
Function" 4 at the posi-
tion "O".
Fill the water tank 3
with water.
Wait until the green
control lamp 7 glows.
-
Wait until the appliance
has heated up again.
Descale the appliance (see
chapter "Scale removal").
Place the switch "Anti-calc
Function" 4 at the posi-
tion "O".
Wait until the appliance
has heated up again.
GB
MT
51