Jet Nozzles; Switching On / Off; Changing The Massage Type; Concentrating Massage Intensity At Foot- Or Back Nozzles - DURAVIT Combi-System E Manual De Instrucciones

6.4 Jet nozzles

Switching on / off

> Press the "Jet" button.
The nozzles are switched on/off (water massage).
! Turning on the jet nozzles also activates the heater and UV Hygiene Management
system.

Changing the massage type

> Press the "Jet" button until it flashes.
Setting buttons are now activated and illuminated.
> Press the " " button.
Water-and-air massage is activated.
> Press the " " button a second time.
Water massage with rotating air supply is activated.
> Press the " " button a third time.
Water massage is reactivated.

Concentrating massage intensity at foot- or back nozzles

> Turn the selector in the direction of the foot or back nozzles.
Massage intensity is concentrated at the foot or back nozzles.

Changing the direction of the massage stream

> Rotate the ball of the jet nozzle until you find the most pleasing direction for the
massage stream.

6.5 Switching on heating (optional)

Heating starts automaticallywhenever the jet nozzles are activated.

6.6 Switching on UV Hygiene Management (optional)

UV Hygiene Management starts automatically whenever the jet nozzles are activated.
28

6.7 Switching white LED spotlight on/off

CAUTION! Risk of eye injury from light beam.
> Do NOT look directly into the lighting elements.
> Press the "Light" button.
The light is switched on/off.

6.8 Coloured LED lights (optional)

CAUTION! Risk of eye injury from light beam.
> Do NOT look directly into the lighting elements.

Turning on "Rainbow" colour programme

> Press the "Light" button.
The light is switched on/off ("Rainbow" colour programme).

Activating colours

> Press the "Light" button until it flashes.
Setting buttons are activated and illuminated.
> Press of the " " button until the desired colour appears
(white – red – violet – blue – turquoise – green – yellow - "Rainbow" colour pro-
gramme).

Changing intensity

Prerequisites: Colours activated.
> Press the "Light" button until it flashes.
Setting buttons are now activated and illuminated.
> Press the "+" or "-" button.
Intensity increases and decreases.

Changing duration of colour shift

Prerequisites: "Rainbow" colour program activated.
29