MoJack PRO Instrucciones De Montaje página 9

STEP 8
Hang the Lift Arm 2 on the Carrier by hooking
the slotted area of the Lift Arm under the top
bar of the Carrier. Lift Arm must be inserted
from the front and then lowered which fastens
Lift Arm into place. Insert Clevis Pin
the hole in the Carrier and lock by fastening the
Hair Pin to the Clevis Pin.
22
STEP 9
Slide Lift Arm Inserts
6
Lift Arm and secure with Push Pins
2
STEP 10
Ready the Wheel Pads
Support Rods and Hair Pins
11
STEP 11
Slide the Wheel Pads
Lift Arm Inserts and secure with Push Pins
6
Note: The Wheel Pads can be moved in or out to fit
different mower widths. Use the configuration that
works best with your model of lawn mower.
Assembly Instructions
through
20
into both sides of the
as shown.
21
Lift Arm Insert 6
for installation by adding
5
.
22
5 onto both sides of the
THIS COMPLETES ASSEMBLY.
MoJack PRO Lift
Lift Arm 2
Lift Arm 2
Push Pin 21
Wheel Pad 5
Hair Pin 22
5 Wheel Pad
.
21
9
Top Bar of Carrier
Carrier
Support Rod 11
21 Push Pin
Lift Arm Insert 6
22 Hair Pin
20 Clevis Pin
21 Push Pin
Lift Arm Insert 6