Installation Rules; Conformity To Standards - Vimar CLIMA 01923 Manual De Instrucciones

- 433 MHz antenna with coaxial cable connection (to be used
when the antenna needs to be positioned at a distance, or
where there are reception problems) .
The rigid wire or antenna must always be assembled.
• Enclosure: six 17 .5-mm modules for EN 50022 rail mount
• Protection level: IP40
• Class II devices:
• Number of automatic cycles: 100 .000
• Type of contact opening: micro-disconnect
• Type of action: 1B
• Tracking index: PTI175
• Pollution status: normal
• Temperature: 0 °C +55 °C
• Temperature for shipping and storage: -25 °C +60 °C

8. INSTALLATION RULES.

• The installation must be done according to in force Italian CEI
specifications (or equivalent rules for buildings electrical instal-
lation) .
• Disconnect the mains acting on the main switch before operat-
ing on the system .
• Use the yellow/green insulated conductors only for the connec-
tion to the earthing circuit .
• Verify if the supply conductors cross-sectional area is sufficient
for the feeded load, in any case it must never be less than 1 .5
mm .
2
• Clamp fully, with care, the conductors in the terminals; faulty
clampings can cause temperature rises high enough for a fire
risk .

9. CONFORMITY TO STANDARDS.

BT, EMC, R&TTE Directives
EN 60730-1, EN 60730-2-9, EN 300 220-3, EN 301 489-03
Standards .
15 - ENGLISH