König Electronic IR-URC30 Manual De Uso página 3

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 37
menu function. But during set up mode they are used for cursor, confirm and
exit to program your remote control only.
RED YELLOW BLUE GREEN for TV Fast Text.
SHOW VIEW Scans all channels for your program quick view.
ALL OFF Switches off all your devices only with one button.
MACRO Let you make sequent operation for you home theater.
Television video
TV and text mixed
Teletext mode
Page hold
Displays info on the selected channel
Direct Set Up (by Brand and Code)
1. Turn on the device (e.g. TV) you would like to operate. If it is a VCR, please
insert a tape.
2. Press and hold the SET key on your remote control. Then press
(simultaneously) one of the device keys (e.g. TV)
3. Then release them, the brand will be displayed on the screen.
4. You can press the ▲ or ▼ key to select the brand of your device (e.g. your
TV brand: Life)
5. Check the function of the keys. If none of the keys of your new remote
control can work, or most of the keys work improperly, please try another
code by the ◄ or ► key, until all basic functions operate properly.
6. If you are satisfied with the code, just press the OK key to save it. LCD
shows SUCCESS and then finishes the set up.
Set-up by Auto Search
1. Turn on the device (e.g. television) you would like to operate. If it is a VCR,
please insert a tape.
2. Press the SET key on your new remote control for more than 3 seconds,
then release it.
3. Press the ▲ or ▼ key to select to CODE SETUP in the LCD menu, and
press the OK key.
4. The screen shows the DEV SEARCH in the LCD menu, and press the OK
key, then you press device key to select your desired operation device(e.
g. DVD) and then press the OK key to start the Auto Search.(you must point
your remote control to your device at the moment)
5. See if the device reacts or not, once the device reacts, press any key to stop
the search.
6. Test if most of keys work good or not. If most keys work not good enough,
please step 4~5.
7. If you find one satisfied code please press the OK key to save it and LCD
shows SUCCESS then show DEV SEARCH. You can press device key (e.g.
DVD) again to finish SET UP or use ▲ or ▼ to select other set up.
1 s
3

Publicidad

Tabla de contenido
loading

Tabla de contenido