3. Connect the power cable (6) to a power outlet.
D
4. Turn the power control (2) to the right to switch on the system. The
GB
LED will light. Start your audio source to test the system.
5. Turn the power control as far as you can to the left when you want
F
to turn the system off. This control also adjusts the volume.
E
6. Turn the bass control (4) to adjust the bass level on the subwoofer.
I
Note: Select stereo mode when you want to connect the system to a
DVD player.
Technical data
Model number:
• Total output (RMS):
• Output of subwoofer (RMS):
• Output of satellite (RMS):
• Driver unit subwoofer:
• Driver unit satellite:
• Impedance:
• Frequency range:
• Dimensions of subwoofer (WxHxD): 200x194x284 mm
• Dimensions of satellite (WxHxD):
Notes:
The loudspeaker system can also be used in the vicinity of a TV. Should
you experience interference nevertheless, move the system further
away from the television, then switch it off and on again.
Safety information
• Do not attempt to service or repair the device yourself. Refer all
servicing to qualified service personnel.
• Do not make any modifications to the device – doing so will invalidate
the guarantee.
• Do not use the device in the vicinity of water (e.g. wash basins, baths
or swimming pools) and keep it away from moisture, dripping or
splashing liquids and rain.
Guarantee
We guarantee this product in respect of workmanship and all built-in
components for a period of two years from date of purchase.
If you need help..
Our technical support team will be happy to help with any technical pro-
blems. The hotline number can be found on the back of this manual.
SL-8170
44 W
20 W
8 Wx3
5.25"(magnetically shielded)
2"(magnetically shielded)
4 Ohm
80 Hz-20 kHz
130x200x140 mm
6