Using The Cooling Device - Waeco MyFridge MF-5M Instrucciones De Uso

Operation
7.2

Using the cooling device

NOTICE!
A
 When using the refrigerator as a milk cooler, also see the in-
structions in the customer documentation of your coffee maker.
 Like every refrigerator, your cooler must be properly ventilated
so that any heat created can dissipate. Otherwise, it may not
work properly.
NOTE
I
Seal the opening on the side of the appliance with the plug if you
have not fed a tube inside (fig. 3 A, page 4).
➤ Place the refrigerator on a firm base.
Ensure that the ventilation slots are at least 10 cm away from the wall so
that the heat that arises during operation can be drawn off.
NOTE
I
For use as a milk cooler for coffee makers only, the refrigerator has
holes in both sides, sealed with a black plug (fig. 3 A, page 4).
Remove the plug (fig. 3 B, page 4) and push the milk tube sup-
plied into the appliance. Now the coffee maker can draw up cold
milk directly from a suitable vessel inside the refrigerator.
➤ Insert the flat plug of the 230 V cable (fig. 1 2, page 3) into the socket
(fig. 2 1, page 3) on the appliance and insert the power plug into the
230 V socket.
or
➤ Insert the flat plug of the 12 V cable (accessory) into the DC socket
(fig. 2 2, page 3) and connect it to the cigarette lighter socket or a 12 V
socket in your car.
➤ Push the switch (fig. 3 3, page 4) on the control panel to "HOT" or
"COLD" to switch the device on.
✓ The refrigerator starts cooling/heating the interior and the appropriate
LED lights up.
NOTICE!
A
Ensure that the objects placed in the refrigerator are suitable for
cooling or heating to the selected temperature.
22
MyFridge MF-5M
EN