IPC SG-48 S8010 M Manual De Instrucciones página 11

INTRODUCTION
This manual is an integral part of the
appliance and it contains all the
necessary
operation and maintenance. The user
must read it carefully before starting
the appliance.
ORIGINAL INSTRUCTION
The text was scrupulously revised, however, any
eventual printing mistake should be indicated to the
manufacturer. Moreover, in order to improve the
product we reserve the right to modify and update this
publication without notice. Any reproduction of this
manual, even partial,
authorization of the manufacturer.
INTENDED USE
Professional steam generator:
This appliance is to be used in the inside. The functions
provided for this appliance are exclusively the cleaning
of floor and washable surfaces compatible with steam,
textiles included; (not to be used on electrified
parts).Any other use other than that, it is to be
considered unauthorized and dangerous.
IDENTIFICATION AND TECHNICAL DATA
On the label attached on the back of the machine, you
can find the technical specification shown in the chart
below:
Model: SG-48 S8010 M
Electric power supply(V–Hz)
Max power
Boiler max power
Max current (Amper)
Steam pressure
Steam production
Boiler capacity
Heating time
Acceptable pressure
Steam max temperature
Boiler material
Weight
Dimensions LxPxH
Tolerated water conductivity
Water tank
Detergent tank
Vacuum bucket
Vacuum motor By-pass 2 st.
Appliance of class
Sound pressure
Socket for vacuum
(
SEE LABEL ON THE MACHINE)
SAFETY DEVICES OF THE PRODUCT:
Two thermostats: one ceramic thermostat to restore
manually frontal to the boiler, one bulb thermostat
inserted in the tube between the resistances, it begins
to work in the event of excessive temperature or
anomaly.
Safety valve, it allows the discharge of the steam in
excess in case of anomalous condition of the machine
under pressure. If it starts working, turn the machine off
and take it to a maintenance center for a checkup.
Low voltage in the handle (safety voltage used for
connection to the inside of the hose).
information for
is forbidden without
3-05IPC 3-05IUK 3-05IBR
230V/50Hz 240V/50Hz 220V/60Hz
3,5 kW 3 kW
3.4 kW 2.9kW
15.2A 13A
800kPa (8 bar)
80÷95 g/min.
3.2l
6 min.
1000kPa (10bar)
185°C
inox Aisi 304
32kg
745x480x1040
80÷1500uS/cm (4÷75 °f)
5l
5l
13l
max. 175 m³/h
I
76 dB(A)
Max 1400W (con fuse interno 8A T)
its
the
- The Electric power connection must be made by a
qualified electrician and must conform to IEC 60364-1.
It is recommended that the electric supply to this
3.2 kW
machine should include a residual current device that
3.1 kW
14.5A
interrupts the power supply if the leakage current to
ground exceeds 30 mA for 30 seconds or a device that
checks the grounding circuit.
- WARNING Children or unqualified persons should not
use the machines.
- The device can be use by persons with reduced
physical, sensory or mental capabilities, or lack of
experience or knowledge as long as they are under
surveillance or after having received instructions
regarding the safe use of the appliance and after the
comprehension of its dangers.
-Children must not play with the appliance.
- The appliance must be disconnected from the plug
after use and before the user performs maintenance on
the unit.
- The cleaning and maintenance meant to be performed
by the user should not be made by children without
supervision.
- The liquid or steam must not be directed towards the
devices which contain electrical components, such as
the interior of ovens.
- Do not use in swimming pools when they are full of
water.
- Do not leave the device unattended when it is
connected to the power.
- Do not use the device if it has been dropped, if there
are visible signs of damage or if there are losses.
- Maintain the machine out of reach of children when it
is used or it is cooling down.
11
USED SYMBOLS
GENERAL DANGER: when used,
this symbol indicates the need to
carefully pay attention to the
functions or notes described
MAINTENANCE: operations and
maintenance details
STEAM: attention hot steam jets
HOT SURFACES: attention burns
DECOMMISIONING: rules to be
followed at the end of the product
life
DO NOT DIRECT THE JET
towards persons, animals, electrical
equipment under pressure or the
machine itself
SAFEGUARDS RULES