Trouble Shooting; Protection Of The Environment - Directive 2012/19/Eu - VITROTECLABS BP18 Manual De Usuario

TROUBLE SHOOTING

If your humidifier is not working correctly please check the following causes:
TROUBLE
Humidifier does not
operate.
The power light is on, but
there is no mist with wind
The water mist produces an
unpleasant smell.
The power light is on, but
the humidifier doesn't work
The output volume of the mist
is low
Abnormal noise
Very tight tank cap

PROTECTION OF THE ENVIRONMENT - DIRECTIVE 2012/19/EU

Discard the apparatus according to the European Directive on the Waste of Electrical and Electronic
Equipment (WEEE). For more information, contact the competent local authority for waste disposal.
PROBABLE CAUSE
Power cable not plugged in
No water in water tank
New machine.
Dirty water or the water is left in
the water tank for too long.
Too much water in the water
flume
The transducer is dirty.
Water is too dirty or water kept too
long in the tank
Resonant in water tank when
water is too less
Unit is on an unstable surface
Over tightened
25
SULTION
Plug in power cable.
Fill tank with water
Open the water tank and
leave it for 12 hours at
shady and cool place.
Clean the water tank and
change the water.
Pour away some water
from the water flume
Clean transducer by a soft
brush
Clean water tank and
change the water
Fill water into water
tank
Move the unit to a
stable flat surface
Add liquid soap to cap
gasket for ease opening