Tabla de contenido
Publicidad
FUNCTIONS
Rear Panel
11
INPUTS
- Insert here connectors from turntables
1.- Phono inputs L,R
(MM) type. These connections are of dual use, you can turn them
from Phono to Line and viceversa by means of the knob (2).
2.- Phono/Line switches
from Phono to Line.
Important: take good care to match switch setting and type of
signal connected.
3.- Phono Grounding posts
connector to eliminate electrical hum. Ground wire and
connectors are usually supplied with turntables.
4.- Line level inputs L,R
level signal device. That is CD Player, MD player, Cassette
Player etc.
5.- Mic input (Jack 6.3)
6.3 TRS or TR). All Microphones are alloted with a symetric
connection. That means that unwanted noises absorved by the
Mic cable will be erased provided we use TRS Jack.
-All three Microfones are equiped with an Insert
6.- Mic Inserts
Loop to hook an external signal process device. See more of that
at:
OPERATING THE MIXER; MICROPHONE INSERTS
USB Mode
SYSTEM REQUIREMENTS
- PC Windows XP or XP Professional or
Windows Vista with at least one USB port
- Mac OS X or later version with at least one
USB port
- USB 1.1 or greater
NOTE: PLEASE CHECK THAT THE
M I X E R C H A S S I S & C O M P U T E R
C H A S S I S A R E C O N N E C T E D
TOGETHER IN THE GROUNDING
SYSTEM FOR MAC
1. Turn on your computer & your Mixer.
2. Connect the
USB PORT 22
to the
USB
port on your computer via
cable.
3. Select the
APPLE
icon.
4. Select
SYSTEM PREFERENCES.
5. Select the
SOUND
icon.
6. Select
OUTPUT
box to monitor the
computer through the mixer or
record onto the computer through the mixer.
7. Select
USB CODEC
DEVICE.
8. You can begin playing audio from iTunes,
Quicktime, or any other media player
available on your system. To eliminate your
computer's sound effects from running
through the mixer transfer the computer's
signal to the internal speakers:
1. Select the
APPLE
icon.
2. Select
SYSTEM PREFERENCES.
4
8
7
9
10
- Allows us to change the input level
- Connects to the turntable ground
- Insert here connectors from any line
- Connect there the Microphone ( Jack
3. Select
4. Select
5. Select
THROUGH
6. Select
7. Keep
1. Turn on your computer & your Mixer.
2. Connect the
USB
port on your computer via
Windows will recognize & automatically install the
necessary drivers & you can begin playing audio
from any other media. If sound is not playing
(
) on your mixer
through the mixer:
USB
1. Select
2. Select
3. Select
4. Select
5. Select
sounds through the mixer & choose
box to
INPUT
CODEC
one device is connected.
or
USB AUDIO
6. Select
sounds recorded through the mixer into the
computer & choose
AUDIO CODEC [2]
connected.
7. Be sure the
not checked.
8.
APPLY
9. Keep the
area often. To eliminate your computer's sound
5
4
4
6
OUTPUTS
7.- Master output L,R (RCA)
Normally RCA output are used at domestic setups or when cable
lines are short.
8.- Balanced Master output -
connectors are typically used to connect to the amplfier system
for professional use. Specially when cable lines are long and
therefore can caught unwanted noise.
9.- Booth output L,R
used for monitoring at the DJ cabin (when available).
10.- REC L,R
volume control. It can be used to record even while the master
volume is off.
MAINS CONNECTIONAND ON/OFF SWITCH
11.- AC Input
Connect it to the wall outlet socket.
Always assure that the tension and frequency of the outlet
matched the specified at the mixer.
icon.
SOUND
SOUND EFFECTS.
PLAY ALERTS & SOUND EFFECTS
scroll down menu.
INTERNALSPEAKERS.
SOUND
open to access this area often.
SYSTEM FOR PC
USB PORT 22
( ) on your mixer to the
USB
menu.
START
CONTROLPANELS.
SOUNDS &AUDIO DEVICES.
AUDIO
tab.
SOUND PLAYBACK
for computer
USB AUDIO
or
if more than
USB AUDIO CODEC [2]
SOUND RECORDING
for external
USB AUDIO CODEC
if more than one device is
USE ONLY DEFAULT DEVICES
the settings.
open to access this
CONTROL PANEL
mc club
4
3
4
4
2
- Connect to the amplfier system.
Balanced Jack 6.3 stereo
- This is a second Master output normally
- The record output is not affected by the Master
- Input connection for the inboard power supply.
effects from running through the mixer transfer
the computer's signal to the internal speakers:
1. In the
CONTROL PANELS
SOUNDS &AUDIO DEVICES.
2. Select
SOUNDS
tab.
3. In the scroll down menu for
select
SCHEME
NO SOUND.
4.
the settings.
APPLY
5. Select
OK.
You can begin playing audio from any other
media player available on your system.
cable.
NOTE:
WHEN USING AUDIO SOFTWARE
YOU MUST ADJUST THE PREFERENCES
OF THE SOFTWARE PROGRAM.
WHEN ADDING THE USB MIXER
NOTE:
T O Y O U R S O U N D D E V I C E T H E
COMPUTER'S DEFAULT HAS THE
VOLUME LEVELS SET AT HALF. ENTER
YOUR AUDIO SETTINGS & ADJUST THE
VOLUMEACCORDING TO YOUR NEEDS.
RECORDING VIA USB
This mixer is compatible with most wave
editing software programs. You may record
from the
USB PORT 22
or
USB
onto the computer regardless of the
assignment. The signal coming from
outputs will be sent to the
RECORD
is
computer via
the
USB PORT 22
1
4
select
SOUND
(
) simultaneously
USB
(
).
Publicidad
Tabla de contenido
