Bluetooth Operation; Troubleshooting - LOTRONIC Ltc Audio FREESOUND65-BK Manual De Uso

16. ECHO+
17. ECHO-
18. LED ON/OFF (TURN ON/OFF LED)
Built-in recording function
1. In Aux mode: Plug in a USB/SD card and press the record key to go to record function. The screen shows
00:01 to indicate that recording has started. If you connect the USB/SD card for the first time to the
speaker, the system will create a folder named VOICE and the speaker will save the recorded file
automatically in this folder. Press REPLAY button (23) on the remote control to listen to your recorded files.
2. In USB/SD play mode: Press the record key to go into recording mode. The current sound output will stop
and go to mute status. The screen shows "Recording". The recording will start when the screen displays
00:01. You can use a microphone to record. Press REPLAY button (23) on the remote control to listen to
your recorded files.
USB/SD Operation
Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could
generate interference. If the speaker stops working, switch it off and on again, or unplug USB/SD/MMC
card and re-plug it. The speaker should be back to normal status.
Supported music formats: MP3, WMA
1. USB port: plug and play
2. SD/MMC slot: plug and play
3. Mode key: press to cycle through external AUX sound source/USB/SD card/FM/BLUETOOTH
4.Play/pause: Press to play, press to pause, press again to resume play.
5. Previous/Next: During play press once to go back to the beginning of the track or to the next track.
6. Repeat: During play press once to repeat the current song, press twice to repeat all songs.

BLUETOOTH OPERATION

1. Turn on the unit and press the MODE button on unit or on the remote control to select the Bluetooth
function. The display shows "BLUE".
2. In Bluetooth mode, the symbol
mode.
3. Activate the Bluetooth feature on the external device to be paired.
4. Initiate a search for devices. The device shows up as "FREESOUND 65".
5. Select it and enter the password "0000" if required.
6. Press the PLAY button on the unit or the   key on remote control, to start playing and the buttons
NEXT and PREV, or the keys  and  for the selection of songs.
Charging Procedure
It takes 6-8 hours to fully charge the battery. Unplug the adaptor after charging is completed. Don't
overcharge the battery! During the charge, the charge indicator will flash. Once the battery has been fully
charged, the indicator stops flashing.
Note: Please charge as soon as the battery runs low. If you don't use the unit for a longer period of time,
recharge the battery regularly in order to avoid damage to the battery.
Trouble shooting
If a problem occurs, follow the steps in the table below. If problem still can't be solved, please contact your
retailer.
Problem
No sound when power
is turned on
Distorted sound
©Copyright LOTRONIC 2015
on display will start flashing, the system automatically enters search
Possible cause
1. The power cord is not connected
2. Faulty mains outlet
3. No input source
4. Volume set to minimum
1. Master volume is set too high
FREESOUND65
Solution
1. Connect the power cord
2. Use an outlet that receives power
3. Connect an input source
4. Set the volume to an appropriate level
1. Reduce the volume
4