Basic Maintenance - Myride VI-MYPTT-01 Instrucciones De Operación

1.3 BASIC
MAINTENANCE
ENVIRONMENT:
Keep Myride® VX between 30% and 70% humidity. Low humidity can cause gaskets to dry out;
high humidity may cause condensation inside the unit. Operating temperatures should not
exceed 110° or dip below 40° Fahrenheit. Spikes or dips in voltage may damage Myride® VX. If
your power is subject to fluctuations, prevent damage to Myride® VX with a surge protector.
CLEANING:
The LCD and touchscreen panel is delicate. Clean only when necessary
with a soft, damp cloth. Never use liquids on the touch screen, which
can leak into the housing and cause electrical problems.
The product itself may require occasional dusting. Do not use cleaning liquids as
they can leak into the housing and damage electronics. Avoid harsh chemicals
or abrasives which may damage the coating on the surface of the housing.
HARDWARE:
Heavy use may work some fasteners loose. As part of your regular maintenance, please verify
that all bolts and screws are secure in Myride® VX. Please replace defective parts immediately
and do not use the equipment until repairs are carried out. Only use original parts from the
manufacturer. To ensure the level of safety of Myride® VX a regular maintenace is mandatory.
TROUBLE SHOOTING:
Should any unexpected problems arise, please consult the troubleshooting guide at
www.indoorcycling.com. If problems persist, contact your service representative.
5