Setting Fonts Using The Font Setting Card; Cleaning Cards - Star TCP300II SERIE Manual Del Usuario

6. Setting Fonts Using the Font Setting Card

European, US and Korean bound models are provided a standard font setting card that is
for their country. Before using the reader/writer, set the fonts according to the directions
below.
<Procedures to Set Fonts>
1. Turn the power ON while pressing the Cleaning switch.
2. The buzzer will ring and the green status lamp will flash.
reader/writer has entered the "setting mode to use the setting card."
3. Insert the font setting card. The font setting information is automatically read from the
magnetic strip. That new font setting information is then written to the internal memory .
4. When the new settings have been completed successfully, "COMPLETE!" is printed
and the card is discharged. The reader/writer will then return to its normal operating
status.

7. Cleaning Cards

A cleaning card is used to clean the transport rollers inside the unit. Two cleaning cards
accompany each unit. They are in the plastic wrap.
7-1 External Shape
Font Setting Card
Cleaning Switch
85.6
89.6
Status Lamp
Felt Surface
– 6 –
This indicates that the
Felt Surface