Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Handling via remote control
1.
ON
2.
OFF
3.
Press the button for long time, you can increase the brightness of the
lamp continuously (up to 100%).
Press the button shortly, you can increase the brightness of the lamp
stepwise.
4.
Nightlight (approx. 10% of the brightness)
5.
Press the button for long time, you can change the color temperature of
the light slowly from warm white to cold white.
Press the button shortly, you can change the color temperature of the
light stepwise from warm white to cold white.
6.
Press the button for long time, you can change the color
temperature of the light slowly from cold white to warm white.
Press the button shortly, you can change the color temperature of the
light stepwise from cold white to warm white.
7.
Press the button for long time, you can reduce the brightness slowly
(to 10%).
Press the button for shortly, you can reduce the brightness stepwise.
8.
All lights in the infrared range of the remote control will be set to the
same color temperature which was selected lastly with the remote control.
9.
3-Steps color temperature (3000 Kelvin / 4000 Kelvin / 5000 Kelvin)
10.
Timer function (The light turns off after 30 seconds.)
Handling via wall switch
Memory function: If you turn off the light via wall switch and turn on
1.
after >3 seconds the light lights up in the last mode (color temperature,
brightness).
CCT: The color temperature can be changed in 3 steps by switching
2.
on / off several times quickly: 3000 Kelvin / 4000 Kelvin / 5000 Kelvin.
Technical data
Operation voltage:
Battery:
Range of the remote control:
Operation Instruction
3V
2x 1,5V AAA
approx. 6m
11
Publicidad
