Packing List - EGO POWER+ BC1500E Manual Del Operador

◾
Exercise care in handling batteries in order not to short
the battery with conducting materials such as rings,
bracelets, and keys. The battery or conductor may
EN
overheat and cause burns.
◾
When servicing, use only identical EGO
parts. Use of any other accessory or attachment may
increase the risk of injury.
◾
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in operating
condition. Be aware of possible hazards even when
the tool is not operating. Take care when performing
maintenance or service.
◾
Do not wash with a hose; avoid getting water in motor
and electrical connections.
◾
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you loan this tool to someone else, also loan these
instructions to them to prevent misuse of the product
and possible injury.
◾
Always wear substantial footwear and long trousers
while operating the machine.
◾
Always be sure of the footing on slopes and to walk,
never run.
SAVE THESE INSTRUCTIONS!
SPECIFICATIONS
Voltage
No-load Speed
Cutting Mechanism
Cutting Line Type
Cutting Width
Weight (without battery pack)
Measured sound power level L
Max sound pressure level at
operator's ear L
PA
Guaranteed sound power level L
(according to 2000/14/EC)
Valuation of
vibration a
h
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
8
56 VOLT LITHIUM-ION BRUSHLESS BIKE HANDLE LINE TRIMMER — BC1500E
replacement
TM
56 V
4000-5800 /min
Bump Head
AL0950 2.4 mm
nylon twist line
38 cm
3.4 kg
84.81 dB(A)
WA
69.7 dB(A)
86 dB(A)
WA
Left Handle 4.306 m/s
Right Handle 2.893 m/s
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used;In order to protect the operator, user should
wear gloves and ear protectors in the actual conditions
of use.

PACKING LIST

PART NAME
Line Trimmer
Guard
Bike Handle Assembly
Shoulder Strap
Hex Wrench
Operator's Manual
DESCRIPTION
KNOW YOUR LINE TRIMMER (Fig. A)
1. Bike Handle
2. Wing Bolt
3. Lock-off Lever
4. Trigger
5. Speed Lock Knob
6. Shaft
7. Shoulder Strap
8. Cutting Line
9. Guard
10. Line-cutting Blade
11. Bump Knob
12. Trimmer Head (Bump Head)
13. Ejection Mechanism
14. Mounting Slot
15. Electric Contacts
16. Latch
2
17. Battery-release Button
2
QUANTITY
1
1
1
1
1
1