Descargar Imprimir esta página

Baby Unit Components; Parent Unit Components; Initial Use; Package Contents - Topcom BABYTALKER 3100 Manual De Usuario

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 41
Babytalker 3100
7.1

Baby Unit Components

See Figure
A
on the fold-out page.
1
Night light
2
Power LED
3
Night light button
4
On/Off switch
5
Paging button
6
Microphone
7.2

Parent Unit Components

See Figure
on the fold-out page.
B
11 Volume LEDs
12 Loudspeaker
13 Link LED
14 Increase volume
15 On/Off switch
16 Decrease volume / Previous menu
item
8

Initial use

8.1

Package Contents

The equipment is supplied as standard with the following items:
- 1 baby unit
- 1 parent unit
- 1 charging station
- 2 AC mains adapters
8.2

Installing Batteries in the Baby Unit

See Figure
on the fold-out page.
A
You can operate the baby unit with three AA cells (LR06/Mignon; we recommend alkaline
cells) or the included AC mains adapter.
The baby unit cannot recharge batteries.
It is recommended to always leave the batteries in the unit, even if you use the AC mains
adapter. The unit will automatically switch to battery power in case of a mains power
interruption.
– Rotate the belt clip
– Turn the screw on the cover of the battery compartment
unit 90° counterclockwise and remove the battery compartment cover.
Do not turn the screw past the 'Open' point.
– Fit three AA alkaline cells (LR06/Mignon) in the battery compartment.
Ensure that the polarity is correct.
– Close the battery compartment.
Never mix used cells with fresh cells.
7
8
9
10 NEMO radiation switch
17 Power LED
18 Belt/wall fastening clip
19 Battery compartment cover
20 Charging indicator
21 AC mains adapter
- 1 user guide
- 1 service card
- 1 NiMH rechargeable battery pack
9
upward.
Battery cover closing screw
Connector for AC mains adapter
Fixing clips
7
at the back of the baby
OPEN
SEDS
1
x
A
A
LONG
6V/300mA
+
-
ECO
1
x
A
A
5

Publicidad

loading