Technical Data; Disposing Of The Device - Seca 952 Manual De Instrucciones

work normally again.
If this is not the case, disconnect the power supply by briefly removing the batteries. If
this measure is equally unsuccessful, inform the Service department.
8. Servicing
Your seca scale leaves the factory with an accuracy greater than ±0,1 %/±100 g. To en-
sure that this accuracy is maintained, the product must be carefully set up and regularly
maintained. Depending on the frequency of use, we recommend servicing every 3 to 5
years. Please ensure that a qualified service agent is used. If in doubt, contact seca Cus-
tomer Service for further information.

9. Technical data

Maximum load
Minimum load
Graduations
Dimensions
height:
width:
depth:
Height of figures
Weight
Temperature range
Power supply
Batteries
Power consumption
EN 60 601-1:
medical electrical equipment type B:
Accuracy
Functions
10. Disposal

Disposing of the device

Do not dispose of the device in
domestic waste. The device must
be disposed of properly as elec-
tronic waste. Follow the national regula-
tions which apply in your case. For further
information, contact our service depart-
ment at: service@seca.com
Model 952
200 kg / 440 lbs / 31.5 st
1 kg
100 g / 0.2 lbs
920 mm
565 mm
810 mm
20 mm
approx. 24.5 kg
+10 °C to +40 °C
batteries
6 type AA 1.5 V batteries
approx. 25 mA
greater than ±0,1 %/±100 g
Switch between units, NET, Auto-hold
Batteries
Do not throw used batteries away in do-
mestic waste. Dispose of batteries at col-
lection points in the vicinity. When buying
new batteries, select those low in harmful
substances and containing no mercury
(Hg), cadmium (Cd) or lead (Pb).
GB
19