SURFACE KEYPAD
With 2 safety
screws
108 x 83 x 19 mm
INBUILT KEYPAD
108 x 83 x 19 mm
REMOTE ELECTRONICS SURFACE
The keypad is a sUN-s-WdT iN WiegaNd mode for sUN-s
At the bottom of a
standard electrical box
Between axes : 60
+
160 x 150 x 60
QKEYSUNS
� TECHNICAL FEATURES
• Automatic power voltage: 12 to 24 V AC/DC High performance
• Consumption: Min. 10 mA - Max. 130 mA
• Operating temperature: - 30°C to + 50°C
• Watertightness of keypad : IP66
• Watertightness of remote electronics : surface IP55, inbuilt not watertight
• Master code for access control
• 250 programmable user codes each one from 1 to 8 digits
• Non-volatile EEPROM memory
• Programmable self-protection
• 2 relays outputs 5 A, NA/NC
• Programmable output configuration for operation/Stop or push button (000 to
240 seconds)
• Metal keys
• Safety screws
• 3 interchangeable colours (kit supplied)
• 2 power-on indicators available
• Automatic or constant keypad ilumination
• Audible signal for operations in progress (BEEP)
• Push-button input available for OUTPUT N°1
• Door detection input (forcing door or maximum opening time)
• Clock input (free access with key P or time allocation)
• Security : after 8 incorrect codes entered, blocks and emits an alarm signal for
30 seconds or activation of alarm
• Security, twin, accelerated and panic modes for alarm connection
• Automatic and manual modes for automation connection
The keypad is designed to work with a 50 m cable maximum.
If the cable is extended,we won't be able to guarantee the optimum working of
the product.
� CONNECTION
{
NO
OUTPUT 2
C
NC
{
NO
C
OUTPUT 1
NC
N
Programming
bridge
P
Yellow
light
I GT C PB
High position : N
Normal keypad
operation
Factory setting : Position N
-
Green pilot light
+
-
Red pilot light
+
Power supply
12-24 v
AC/DC
Keypad cable :
1 -W1/DATA
2 - DC+
3 - WØ/CLOCK
4 - DC-GROUND
5 - RED LED
6 - GREEN LED
1 2 3 4 5 6
KEYPAD
Position basse : P
Allows access to the memory
without having to key
the master code.