Gabarron TBC Serie Instrucciones De Instalacion Y Uso página 4

EN
1. IMPORTANT INFORMATION
• The warranty of the towel warmer will not cover any
damage caused by the non observance of any of these
instructions.
• This guide must be kept and given to any new user.
• Please, check that the voltage in the rating label fits the
power supply.
• The installation must be carried out in accordance with
the current electrical regulations.
• The installation of the towel warmer should be carried
out by trained personnel.
• The use of electric towel warmers is forbidden in any
area where there is a presence of gases, explosives or
inflammable objects.
• The towel warmer should not be installed exactly under
an electric outlet.
• The appliance must be installed in such a way that it is
impossible for anyone using a bath or shower, to touch the
controls.
• The surfaces of the towel warmer can be hot and
caution is advised when small children are near the
appliance.
• Warning: In order to avoid a hazard for very young
children, this appliance should be installed so that the
lowest heated rail is at least 600mm above the ground.
• If the supply lead of the towel warmer is damaged it
must be replaced by service personnel authorized by the
manufacturer, since special tools are needed.
• This appliance must be earthed.
• Before carrying out any work inside the appliance, the
towel warmer must be disconnected from the electricity
supply.
• All the models incorporate a safety device. This will
disconnect the towel warmer if for some reason it fails. If
the safety device activates the towel warmer will need to
be repaired by service personnel authorized by the
manufacturer.
• The presence of air particles of smoke, dust and other
pollutants could, in time, discolour the walls and surfaces
around the towel warmer.
2.- INSTRUCTIONS OF INSTALLATION
The towel warmer is designed to only work in a vertical
position and fixed to the wall, never to the ceiling.
A clear distance of 5 cm must be allowed around the towel
warmer.
The fixation to the wall is carried out by means of the four
supports given with the appliance, according to the
following outline.
The towel warmer supports should be placed in sequence
as indicated below.
3. APPLICATION OF USE
The bathroom towel warmer has two very useful
functions: can be used as heating for bathrooms and can
be used to dry towels and clothes.
The towel warmer incorporates an electronic thermostat
that controls the temperature of the room. An indicator is
illuminated when the apparatus is consuming energy.
A small control allows you to adjust the temperature. By
rotating the control of the thermostat to the maximum the
towel warmer will heat more quickly, when the required
temperature is reached slowly rotate counter clockwise
until the luminous indicator goes out. In this position the
towel warmer will maintain the selected temperature
automatically. Different surface temperatures could arise
due to the internal fluid distribution in the towel warmer.
4
Cable exit always on the
lower right side.