Contents
Introduction ................................................................................
Abbreviations / Meanings ......................................................
Models .....................................................................................
Power .......................................................................................
Installation ...................................................................................
Climatic Curves...........................................................................
Pre-Set Curves ......................................................................
Clock...............................................................................................
Error Codes ............................................................................
Fault Code Table ..................................................................
Wiring Diagram ..........................................................................
Safety consideration
Read and follow manufacturer instructions carefully. Follow
all local electrical codes during installation. All wiring must
conform to local and national electrical codes.
Improper wiring or installation may damage the NUI.
Understand the signal words DANGER, WARNING, and
CAUTION. These words are used with the safety--alert
symbol. DANGER identifies the most serious hazards which
will result in severe personal injury or death. WARNING
Introduction
Carrier's NUI series programmable user interface is wall--
mounted, low--voltage user interface which maintains room
temperature by controlling the operation of a heating and/
or air conditioning system. "Heat pump", " Air conditioner"
and "Heat only" are available, with the present versions. A
variety of features are provided including separate heating
and cooling set-points, keypad lockout, backlighting, and
built--in installer test etc. Programming features include
2
Page
Abbreviations / Meanings
2
User Interface Comfort Series 33AW-CS1
2
User Interface 33AW-RC1
2
Climatic Curve
2
CDU Compressor Device Unit
GMC Global Module controls
3
Stb.
3
Leaving water Temperature
3
EWT Enter water Temperature
3
REFR. Refrigerant Temperature
3
Outdoor Heat Exchange Sensor
6
Discharge Temperature Sensor
6
WSP Water Set Point
12
HP
Heat Pump
12
OAT
Outdoor Air Temperature
14
FR
Mode Frequency Reduction
15
TO
Outdoor Temperature Sensor
15
TR
Refrigerant Temperature Sensor
16
(Placed between the electronic expansion
16
valve and the Air to Water heat exchanger)
16
TS
Suction Temperature Sensor
16
17
18
signifies a hazard which could result in personal injury or
death. CAUTION is used to identify unsafe practices which
may result in minor personal injury or product and property
damage.
NOTE is used to highlight suggestions which will result in
enhanced installation, reliability, or operation.
7--day (all days the same), 5/2 (Mon--Fri and Sat--Sun) and
1-day (all 7 days individually) with 2 or 4 or 6 periods per
day.
This Installation Instruction covers installation,
configuration, and startup of NUI. For operational details,
consult the Owner's Manual.
User interface