Battery Charge; Battery Usb Function; Front Light; User Warnings - Nilox DOC E-Bike X1 Manual Del Usuario

• Turn off the PAS before stopping DOC E-BIKE X1, the last few pedal strokes should therefore
be made without electrical assistance.
BATTERY

BATTERY CHARGE

The battery of the DOC E-BIKE X1 can be charged:
Directly on the bike, without taking the battery
•
out.
Taking the battery out and taking it home or to a
•
place equipped with electrical outlet.
Insert the power supply plug into the power inlet, placed on
the battery next to the USB socket and then plug the battery
charger into the mains.
Both the battery plug and the USB socket are covered with
closing caps for precaution.
If the red light on the power unit comes on, the battery is low.
If the green light is on, this means charging is complete.

BATTERY USB FUNCTION

The lithium battery of DOC E-BIKE X1 has a convenient USB output (see figure above).
It is therefore possible, by means of a dedicated cable (not supplied), to charge digital products such as
smartphones and MP3 players; you can also connect an auxiliary torch.
To start the function, press the red button located on the battery for 3 to 5 seconds until the first light next
to the button itself comes on.
To disable this function, press the button again.
THIS FUNCTION OBVIOUSLY CONSUMES ENERGY. WE THEREFORE RECOMMEND YOU DISABLE IT IF NOT
IN USE.

FRONT LIGHT

DOC E-BIKE X1 is equipped with a 5-LED torch powered by common
alkaline batteries.

USER WARNINGS

Carefully heed the following warnings for use. Use DOC E-BIKE X1 sensibly and responsibly.
DOC E-BIKE X1 is a pedal assisted means of transport.
DOC E-BIKE X1 is a hi-tech product, but its incorrect and inappropriate use can cause injuries. In order to
reduce any type of risk, we recommend you carefully heed the following warnings:
EN
7