Manual Station Preset - Panasonic CQ-C8403U Manual De Instrucciones

Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.
Preset stations can be simply called up by pressing [}]
(P·SET) or [{] (P·SET).
Notes:
¡ Direct selection can be executed with [1] to [6] but-
tons on remote control.
¡ You can switch between 6 and 18 for FM presetting
stations. (EACH BAND/ALL BAND)
¡ Preset stations are changeable. (Preset Swap)
Auto Preset Memory (APM)
Stations with good receiving conditions automatically
preset.
1
Select a band.
2
Hold down
[BAND] (APM)
for 2 sec. or
more.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the sta-
tions (SCAN). To stop scanning, press [}] or [{].
Note: New stations overwrite existing saved stations.
1
Press [MENU] to display the menu dis-
play.
For using the remote
control, hold down
[SEL](MENU) for 2
sec. or more.
2
Press [ ] or [ ] to select a mode to be
} {
adjusted.
3
Press [BAND]
(SET) to adjust.

Manual station preset

1
Tune in to a station.
2
Hold down or
[}] [{]
more.
3
Select a preset number by pressing
or .
[}] [{]
Note: If [BAND] is pressed while receiving an FM
station, FM broadcasting is changeable among FM 1
to FM 3.
4
Hold down [BAND] (SET) for 2 sec. or
more to determine the selection.
Notes:
In step 2, a station can be registered by holding down
¡
the numeric button [1] to [6] for 2 sec. or more.
¡ To stop presetting stations, press
¡ The operation above allows users to replace the cur-
rent station with the station preset in the selected
number while selecting a preset station.
4
Press [MENU] to confirm the adjust-
ment.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
PRESET
Preset range for FM bands
: Individual setting for FM1-3 each
(default)
: Setting of FM1-3 together
CQ-C8403U/C8303U
for 2 sec. or
[DISP]
(Display).
21