Peavey FX Serie Manual De Instrucciones página 20

Rear Panel
Group Outputs
53
These Group Outputs feature 1/4" TRS balanced jacks and provide output signal from the Groups. The
output level is set by the Group Level faders (26).
Left/Right Outputs
54
The Left/Right Outputs feature two 1⁄4" TRS Z-balanced jacks and two fully balanced XLR outputs. The
1⁄4" outputs can be used with Tip‚ Ring, Sleeve (TRS) balanced or Tip, Sleeve (TS) unbalanced connec-
tors. The output level is set by the Master Level faders (40). Both outputs can be used simultaneously.
AUX 1 - 6 Outputs
55
These AUX Outputs feature 1/4" TRS balanced jacks and provide signal from the Auxiliary Outputs. The
output level is set by the AUX Level controls (19, 20).
Effects 2 Patch Jack
56
This 1/4" TRS jack allows the internal Effects 2 processor to be patched to an Input or Group Insert or
to an external device. The tip carries the input (return) signal to the compressor and the ring carries the
output (send).
EFX 2 Return Jacks
57
These 1/4" high-impedance balanced inputs can be used as stereo or individual returns. Designed for
effects return, they can also be used as additional stereo inputs. The L/Mono input provides signal to
both inputs if no connector is attached to the Right jack. The tip is the positive input for both balanced
and unbalanced use.
Media In Jacks
58
The Media Input jacks are set up for a +4 dBu input from a stereo audio media source. The signal feeds
the Media In level control (34).
Record Output Jacks
59
The output jacks can provide a +4 dBu output signal to a stereo recording device. The output level is
controlled by the Record Output level control (36).
USB Memory Connector
60
Use this A-type USB connector to plug in a removable data storage device to read or write MP3-
formatted files.
USB Computer Connector
61
Use this B-type USB connector to connect with a computer.
20