LG LRFDS3006 Manual Del Propietário página 29

e Fresh Air Filter
The Fresh Air Filter helps remove odors from the refrigerator.
NOTE
• Replace the air filter when the
Filter button for three seconds to turn the icon light off. Replace the air filter approximately every six
months.
f Lock
The lock function disables every other button on the display.
• When power is initially connected to the refrigerator, the lock function is off.
• To lock the control panel buttons, press and hold the Lock button until the
display and the function is activated.
• To disable the function, press and hold the Lock button for approximately three seconds.
g Water Filter
Replace the water filter when the
Water Filter button for three seconds to turn the icon light off. Replace the water filter approximately
every six months.
h Wi-Fi
The Wi-Fi button, when used with the LG SmartThinQ app, allows the refrigerator to connect to a
home Wi-Fi network. Refer to Smart Functions for information on the initial setup of the application.
The icon shows the status of the refrigerator's network connection. The icon illuminates when the
f
refrigerator is connected to the Wi-Fi network.
Press and hold the Wi-Fi button for 3 seconds to connect to the network. The icon blinks while the
connection is being made, then turns on once the connection is successfully made.
i Measured Fill
The measured fill function dispenses premeasured amounts of water automatically.
j Water & Ice Type
Select the desired dispenser mode from the buttons on the dispenser control panel. Press the
dispenser switch with a glass or other container to dispense cubed ice, water or crushed ice.
CAUTION
Display Mode (For Store Use Only)
• The Display Mode disables all cooling in the refrigerator and freezer sections to conserve energy while
on display in a retail store. When activated, OFF is displayed on the control panel and the display remains
on for 20 seconds.
• To deactivate / activate:
- With either refrigerator door opened, press the Ice Plus button 3 times consecutively while pressing
the Refrigerator button. The control panel beeps and the temperature settings display to confirm that
Display Mode is deactivated. Use the same procedure to activate Display Mode.
NOTE
• When the refrigerator is in the Power Saving Mode, the display remains off until a door is opened or a
button is pressed. Once on, the display remains on for 20 seconds.
icon turns on. After replacing the air filter, press and hold the Fresh Air
g
h
icon turns on. After replacing the water filter, press and hold the
OPERATION 29
icon appears in the
k