PR electronic 9116B-EMP Manual Del Producto página 34

LERBAKKEN 10, 8410 ROENDE DENMARK
9116Axx Installation:
Non Hazardous area or Zone 2
+
+
T
+
-
+
-
-
Loop V mA
4- wire 3- wire 2- wire
Potm . 2
Potm. 3
Potm. 1
-
+
RTD / LinR TC
For installation in Zone 2, the module shall be installed in an enclosure in type of protection Ex n
or Ex e, providing a degree of protection of at least IP54. Cable entry devices and blanking
elements shall fulfill the same requirements.
For installation on Power Rail in Zone 2, only Power Rail type 9400 supplied by Power Control Unit
type 9410 (Type Examination Certificate IECEx KEM 08.0025X) is allowed.
The 4501 programming module is to be used solely with PR electronics' modules. It is important
that the module is undamaged and has not been altered or modified in any way.
Only 4501 modules free of dust and moisture shall be installed.
Revision date:
2018-03-01
34
4501
54
53
52
51
44
43
42
41
9116
Power Rail
Version Revision
V8 R0
9116B-EMP - Versión del producto 9116-003
Supply terminal
Voltage:
34
33
Status relay, terminal (33,34)
32
Zone 2 installation:
31
Voltage max:
Power max:
Current max:
14 Relay output, terminal (13,14)
Zone 2 installation
13
Voltage max:
Power max:
12
Current max:
11
Prepared by:
PB
9116QI01
(31,32)
19.2 – 31.2 VDC
32 VAC/ 32 VDC
16 VA / 32 W
0.5 A AC / 1 A DC
32 V AC / 30 VDC
64 VA / 60 W
2 A AC / 2 ADC
Page:
5/5