Interlogix TruVision DVR 11 Guia De Inicio Rapido página 6

To connect the remote control to the DVR:
1. Press Menu on the front panel or right-click
the mouse and select Menu. The main
menu screen appears.
2. Select Display mode settings
3. Check and remember DVR device address
value. The default value is 255. The device
address is valid for all IR controls.
4. On the remote control press the
button.
5. Enter the device address value. It must be
the same as that on the TVR 11.
6. Press OK on the remote control or front
panel.
USB mouse
The USB mouse provided with the TVR 11
operates all the functions of the DVR, unlike
the front panel, which has limited functionality.
The mouse lets you navigate and make
changes to settings in the user interface.
Connect the mouse to the DVR by plugging
the mouse USB connector into the USB port
on the back or front panel. The mouse is
immediately operational and the pointer
should appear.
Web browser control
The TVR 11 web browser lets you view,
record, and play back videos as well as
manage all aspects of the DVR from any PC
with Internet access. The browser's easy-to-
use controls give you quick access to all DVR
functions.
To access the unit, open a web browser and
enter the IP address assigned to the DVR as a
web address. In the logon screen, enter the
default user ID and password:
• User ID: admin
• Password: 1234
The default values for TVR 11 network
settings are:
• DHCP: Enabled by default.
EN : 6
•
•
•
•
> Monitor.
•
•
Note: The following ports need to be followed
Device
Figure 4: Web browser interface
Live view mode
Live mode is the normal operating mode of the
unit where you watch live pictures from the
cameras.
Regularly used functions in live view can be
quickly accessed by clicking the left-button of
the mouse when its cursor is on the camera
image. The shortcut pop-up toolbar appears.
See Figure 3 on page 4 for a description of
the functions available.
Configuring the TVR 11
The TVR 11 has an icon-driven menu
structure that allows you to configure the unit's
parameters. Each command icon displays a
screen that lets you edit a group of settings.
Most menus are available only to system
administrators.
Refer to the TVR 11 user manual for detailed
information on configuring the unit.
IP address - 192.168.1.82
Subnet mask - 255.255.255.0
Gateway address - 192.168.1.1
Server Port: 8000
HTTP Port: 80
RTSP port: 554
in the router in order to connect properly:
Server port and RTSP port.
TruVision DVR 11 Quick Start Guide