Descargar Imprimir esta página

Denon DJ MC7000 Guia De Inicio Rapido página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Features
Top Panel
17
56
16
18
55
19
18
33
45
34
31
32
32
24
36
40
42
41
43
43
1. Input Selector: Set this switch to the desired audio source from this channel: USB (a track
playing on that layer in the software), Line (a device connected to the line input on the rear
panel), or Line/Phono (a device connected to the line/phono input on the rear panel).
Please note that the Line/Phono selector switches on the rear panel must also be set
properly. Also, a channel's controls will only send MIDI information when its input selector
is set to USB.
2. USB Selector: Press this button to select whether the deck is controlling the computer
connected to USB Port 1 or USB Port 2. Remember to set the channel's input selector
to USB if you want it to play the audio from that layer in the software.
3. Channel Level: Turn this knob to adjust the level of the pre-fader, pre-EQ audio signal for
the channel.
4. Channel Level Meters: These LEDs display the audio signal level of the channel.
5. Channel EQ: Turn these knobs to boost or cut the high, mid-range, and low frequencies
for the channel.
6. Channel Filter: Turn this knob to adjust the filter applied to the channel. Turn the knob
counterclockwise to apply a low-pass filter. Turn the knob clockwise to apply a high-pass
filter.
7. Channel Cue: Press this button to send the channel's pre-fader signal to the headphones'
cue channel.
57
56
56
11
55
55
58
54
29
28
37
38
39
35
2
50
1
1
3
48
4
4
51
5
52
5
53
49
5
23
6
7
7
30
9
44
46
47
8
25
26
27
14
1
3
3
4
13
5
5
5
5
15
5
5
21
6
6
20
7
22
9
9
12
8
8
10
2
1
3
4
5
5
5
6
7
9
8
5

Publicidad

loading