Hoover H-PURE 700 STEAM Manual De Instrucciones página 4

GETTING TO KNOW YOUR CLEANER
H-PURE 700 STEAM combines vacuum and steam cleaning for extremely hygienic
cleaning results both on hard floor and carpet. According to the cleaning needs, it can be
used either in vacuum or steam mode, and even combining both functions at the same
time. The product is fully equipped with accessories to be used with the portable steam
handheld to clean and hygienize stubborn dirt and a combination of tools to vacuum
above floor surfaces.
A. Vacuum On/Off Button
B. Steam emission Regulator
C. Steam Handheld Release Button (Push & Go)
D. Steam Emission Regulator for Handheld
E. Main ON/OFF Button
F. Water Tank Release Button
G. Floor type selector pedal
H. Main Nozzle
I. Nozzle Suction Regulator
J. Storage Tray
K. Mop Holder
L. Steam/Vacuum selector pedal
M. Water Tank
N. Portable Steam Handheld
O. Steam Release Trigger for main nozzle
P. Handle Release Button
Q. Steam Release Trigger for Handheld
R. Dust Bin Release Button
S. Dust Bin
T. Vacuum Hose Connection Cover
U. Extension Hose for above floors vacuuming
* Certain Models Only
V. Rigid Long Tube for above
floors vacuuming
W. 3in1 Accessory
X. Steam hose
Y. Refresh Conical Pipe
Z. Small Round Brush
AA. Curved Nozzle
AB. Small Copper Round Brush
AC. Comb Nozzle
AD. Shovel Plate
AE. Multi-Purpose Nozzle
AF. Large Scraper
AG. Textile Pad
AH. Refresh Tool
AI. De-Scaling Tool
AJ. Microfiber nozzle mops
AK. Anti-Calc Filter
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Insert the nozzle into the main body until you hear the click. [1]
2. Insert the handle into the main body until you hear the click. [2]
3. Attach the microfibre mop to the mop holder and place it underneath the main
nozzle of the cleaner. [3]
USING YOUR CLEANER
All modes can be used separately or you can vacuum and steam clean simultaneously.
VACUUM MODE:
Plug the cleaner into the mains power and press the main on/off button on the
steam handheld. [6]
1. Press the floor type selector pedal to select the ideal cleaning mode for the floor
type. [7]
Hard Floor cleaning – Press the pedal on the nozzle on Hard Floor Mode.
In this position, brushes and wiper blade are lowered to protect hard floors.
Standard Carpet & Rugs Cleaning – Press the pedal on the nozzle on Carpet Mode. In
this position, brushes and wiper blade are raised to allow a perfect ease of movement on
carpet surface. Suction regulator on nozzle can be used to adjust suction power on the
nozzle according to various carpet. [8]
Press the Steam/Vacuum selector pedal on the nozzle to select Vacuum Mode. [9]
2.
3. Select the VACUUM mode button onto the handle. [10]
4. Recline to unlock the cleaner by placing a foot on the nozzle and lowering the main
body to use. [11]
NOTE: Please switch VACUUM button off if there is water on floor.
STEAM MODE:
Plug the cleaner into the mains power and press the main on/off button on the steam
handheld. [6]
Fill the water tank by releasing it through the tank release button, open the lid and fill in
tap water. Close the lid and put the water tank back on the cleaner. [4,5]
This operation must always be carried out with the power cable disconnected from the
mains and the cleaner has fully cooled down.
NOTE: Do not add any chemicals, detergents or perfumes.
After a few seconds the steam ready light (BLUE) will stop blinking indicating the cleaner
is ready for use.
1. Press the Steam/Vacuum selector pedal on the nozzle to select Steam Mode. [12]
Press the steam regulator buttons on the handle to select steam intensity. [13] :
2.
2
GB