Troubleshooting And Warning - Thrustmaster TFRP T Flight Rudder Pedals Manual Del Usuario

TROUBLESHOOTING AND WARNING

• My pedal set is not working properly, or seems to be improperly calibrated.
- Power off your PC (or your game console), and disconnect the adapter's or joystick's
USB connector. Then reconnect the USB connector, power on your PC (or your game
console) again, and restart your game.
- Make sure that the adapter's selector switch (8) is set to the AIRPLANE position, and that
the LED is lit up in GREEN.
- When connecting the adapter's or joystick's USB connector, always leave the rudder axis
centered (without placing your feet on the rudder).
• I can't configure my pedal set.
- In your game's Options / Controller / Gamepad or Joystick menu, select the appropriate
configuration or completely reconfigure the controller's options.
- For more information, please refer to your game's user manual or online help.
- Use the T.A.R.G.E.T (Thrustmaster Advanced pRogramming Graphical EdiTor)
advanced programming software.
• My pedal set is too sensitive, or not sensitive enough.
- Your pedal set automatically calibrates itself after a few movements, and after having
reached the physical stops for the rudder axis and the 2 differential brake axes.
- In your game's Options / Controller / Gamepad or Joystick menu, adjust the sensitivity
and dead zones for your controller (if these options are available).
- Use the T.RJ12 USB ADAPTER Calibration Tool advanced calibration software.
- Use the T.A.R.G.E.T (Thrustmaster Advanced pRogramming Graphical EdiTor)
advanced programming software.
4/6