Declaration Of Conformity - WEPA Topitec Touch Manual De Uso

DECLARATION OF CONFORMITY

The delivered TOPITEC
conforms to the following regulations:
We herewith declare that the design and construction of the product named above meet
the requirements laid down in the above European Directives and the DIN EN standards
listed below. Harmonised standards:
DIN EN 62079
DIN EN 61010-1 :2010
DIN EN ISO 12100 :2010
DIN EN 13857
DIN EN 349 ; DIN EN 614-1 ; DIN EN 894-1,-2,-3 ; DIN EN 953 ; DIN EN 1037
of Machinery Directive 2006/42/EC are fully complied with.
available in electronic format to the relevant state authorities on request.
2
TOUCH operating manual | 05-2013
®
TOUCH, type: V3, S/N; machine no. 33XXX-01
2001 Preparation of instructions. Structuring, content and presentation
Electromagnetic compatibility, emission standard – light industry
Electromagnetic compatibility, immunity standard – light industry
Safety requirements for electrical equipment for measurement, control,
and laboratory use - Part 1: General requirements
Safety of machinery – General principles for design –
Risk assessment and risk reduction
Safety of machinery – Distances to prevent hazard
:2008
zones being reached by upper and lower limbs