Bresser Junior DigiMicro DM700 LCD Instrucciones De Uso página 28

mode when you are in the digital photo
mode).
• Press the menu key to open the storage
menu.
• Using the direction keys (
the option „Protection." Press the OK key
to confi rm.
• Use the direction keys (
"Single," "All" and „Page." Press OK to
confi rm.
• Using the direction keys ( ,
option „Set." Press the OK key to confi rm.
The fi le protection is displayed through the
lock symbol. The protection can be canceled
with "Cancel" and OK for individual fi les (in
Protection / Single) or for all fi les (in Protec-
tion / All).
Deleting Files
• You access the picture index mode by
pressing the Esc key. (You press the Esc
key three times to access the picture index
mode when you are in the digital photo
mode).
• Press the menu key to open the storage
menu.
• Using the direction keys (
the option „Delete." Press the OK key to
confi rm.
• Use the direction keys (
28
"Single," and "All." Press OK to confi rm.
Single: Only the fi le with the yellow border is
deleted.
, ), select All: all saved fi les are deleted.
Abbrechen: Das Menü wird ohne Änderung
verlassen.
, ) to select
Rotating a Digital Photo
• Select a digital photo with the arrow keys
), select the ( , ).
• Press the menu key to open the memory
menu.
• Using the arrow keys (
„Rotate" option.
• Use the arrow keys (
„90º", „180º", „270º" or „Cancel".
Protected digital photos cannot be rotated.
Cropping a Picture
With the „Crop Image" function, you can se-
lect a portion of a digital photo and save it as
a new image.
• Select a digital photo with the arrow keys (
, ).
• Press the menu key to open the memory
menu.
, ), select • Using the arrow keys (
„Crop Image" option.
• Use the arrow keys (
, ) to select „Crop" or „Cancel".
• If you have selected „Crop", a new menu
appears.
• Use the arrow keys (
appropriate section (green box).
• Press the Snap key to confi rm your selec-
tion.
• The selection is now shown on the LCD dis-
play as a new image.
• Press the Snap key to save the image or
the Menu key to exit this function without
saving.
Using an SD Card
, ), select the
How to use the SD card
, ) to select from • If you have not inserted a SD card, the fi les
will be saved in the fl ash memory.
• When inserting a SD card make sure the
contacts are facing up. Do not push the
card in forcefully. This can damage the SD
card.
• The LCD monitor displays a SD card sym-
bol. The storage space available on the SD
card is displayed on the bottom right of the
monitor.
• Before you remove the card, the digital mi-
croscope must be shut off.
, ), select the
, ) to select from
, ) to choose the