Mitsubishi Electric MSZ-FH25VE Manual De Instrucciones página 11

W
EEKLY TIMER OPERATION
• A maximum of 4 ON or OFF timers can be set for individual days of the week.
• A maximum of 28 ON or OFF timers can be set for a week.
E.g. : Runs at 24°C from waking up to leaving home, and runs at 27°C from
getting home to going to bed on weekdays.
Runs at 27°C from waking up late to going bed early on weekends.
Setting1 Setting2
Mon
ON OFF
24°C
Fri
6:00 8:30
Setting1
Sat
ON
Sun
8:00
Note:
The simple ON/OFF timer setting is available while the weekly timer is on. In
this case, the ON/OFF timer has priority over the weekly timer; the weekly timer
operation will start again after the simple ON/OFF timer is complete.
Setting the weekly timer
* Make sure that the current time and day are set correctly.
1
Press to enter the weekly timer setting mode.
2
Press and
Pressing selects the day of
the week to be set.
* All days can be selected.
Setting3 Setting4
ON OFF
27°C
17:30 22:00
Setting2
OFF
27°C
21:00
* blinks.
to select setting day and number
E.g. : [Mon Tue ... Sun]
and [1] are selected.
Pressing selects
the setting number.
3
Press ,
temperature.
Pressing
selects ON/OFF timer.
Pressing
deletes timer setting.
* Hold down the button to change the time quickly.
Press and
other days and/or numbers.
4
Press to complete and transmit the weekly timer
setting.
Note:
• Press to transmit the setting information of weekly timer to the indoor
unit. Point the remote controller toward the indoor unit for 3 seconds.
• When setting the timer for more than one day of the week or one number,
does not have to be pressed per each setting. Press
ter all the settings are complete. All the weekly timer settings will be saved.
• Press to enter the weekly timer setting mode, and press and hold
for 5 seconds to erase all weekly timer settings. Point the remote
controller toward the indoor unit.
5
Press to turn the weekly timer ON. (
* When the weekly timer is ON, the day of the week whose timer setting
is complete, will light.
Press again to turn the weekly timer OFF. (
goes out.)
Note:
The saved settings will not be cleared when the weekly timer is turned OFF.
Checking weekly timer setting
.
1
Press to enter the weekly timer setting mode.
* blinks.
2
Press or
day or number.
Press to exit the weekly timer setting.
Note:
When all days of the week are selected to view the settings and a different set-
ting is included among them,
, and to set ON/OFF, time, and
E.g. : [ON], [6:00]
and [24°C] are
selected.
Pressing
Pressing
adjusts the time.
adjusts the tem-
perature.
to continue setting the timer for
* which was blink-
ing goes out, and the
current time will be
displayed.
lights.)
to view the setting of the particular
will be displayed.
once af-
En-10