Installing Hardware; Safety Precautions - König Electronic CMP-MOBDOCK30 Manual De Uso

Installing hardware

• Set the jumper on your hard disk to 'master' mode.
• Slide the hard disk into the docking station and press it until the hard drive is in place.
• Plug the power adapter into the DC-IN port on the back of the docking station and into a power outlet.
• Press the power button on the back of the docking station to turn it ON.
• Plug the USB 3.0 cable into the back of the docking station and into a free:
USB 3.0 slot of your computer for up to 5 Gb/s data transfer rates.
USB 2.0 slot of your computer for up to 480 Mb/s data transfer rates.
• The computer should now detect the new drive. For Windows
®
Note: F or Windows 2000/XP/Vista/7, the default choice is NTFS. However, you can also choose to format
the drive with FAT32 but ONLY IF the drive size is smaller or equal to 32 Gb.
Removing the hard disk
• Make sure you safely remove the hard disk with the Windows
• Then press the button on the front/top of the docking station to remove the hard disk.

Safety precautions:

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and
are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system for these
products.
ENGLISH
T o reduce risk of electric shock, this product should ONLY be opened by an
authorized technician when service is required. Disconnect the product from
mains and other equipment if a problem should occur. Do not expose the product
to water or moisture.
®
2000/XP/Vista/7, no driver is needed.
®
safely remove USB device option.
2