JB Systems MX 100 Manual De Instrucciones página 5

18. Grounding Lug: For turntable connection. Always use this
connection when using standard turntables with ground
cable.
CONNECTIONS
Make sure all faders are at "zero" and all devices are off.
•
Connect all input sources and processors.
•
Connect your microphone and monitor headphones.
•
Connect the stereo outputs to the power amplifier(s) and/or
•
audio receivers such as tape decks.
Plug your mixer into AC power.
•
Now you are ready to switch everything on.
•
IMPORTANT
Always switch ON your audio input sources such as turntables or
CD players first, then your mixer and finally the amplifiers.
When turning OFF, always reverse this operation by turning off
amplifiers, then your mixer and then input devices.
5 MX 100