Operation; Cleaning; Disinfection; Disinfecting Unit - Zibra corp ZC-LED50 Manual Del Operador

6. OPERATION

6.1 POWERING UP THE LED LIGHT SOURCE
To operate the LED light source: Turn on the power switch.
power switch will light.
6.2 LIGHT BRIGHTNESS DISPLAY AND CONTROL
The light brightness adjustment enables the user to obtain a brighter or darker
illumination of the object of observation.
Adjust the light intensity by turning the intensity control knob.

7. CLEANING

NOTE Always disconnect the power cord before cleaning the system.
The unit can be cleaned with any cleaning agent, which is used for external
cleaning of electric equipment, according to instructions given by the manufacturer
of the cleaning solution.
Do not allow excessive moisture or liquids to come in direct contact with the unit.
Do not use cleaning agents that are not permitted for use with plastics, i.e.,
ammonia, acetone, salty acids (HCl), etc.
Do not allow cleaning agents or liquids to enter the unit outlets.

8. DISINFECTION

8.1 DISINFECTING THE UNIT
NOTE Always disconnect the power cord before cleaning the system.
Use any disinfectant agents which are commonly applied while disinfecting
surfaces of electric medical equipment. Such disinfectant agents are usually in
the form of sprays or damp cloths.
Follow the instructions given by the manufacturer of the disinfectant solution.
LIT168 ZIBRA CORP
(English)
The indicator on
Rev. A
Page 10 of 65