Changing The Sound And Display Settings; Boosting The Bass Sound; D-Bass - Sony XR-C5200 Manual De Instrucciones

Changing the sound and
display settings
The following items can be set:
•CLOCK (page 5).
•BEEP – to turn the beep sound on or off.
•RM (Rotary Commander) – to change the
operative direction of the rotary commander.
— Select "NORM" to use the rotary
commander in the factory-set position.
— Select "REV" when you mount the rotary
commander on the right hand side of the
steering column.
•M.DSPL (Motion Display) – to turn the
motion display on or off.
•A.SCRL (Auto Scroll)* (page 13).
1
Press (SHIFT).
2
Press (2) (SET UP) repeatedly until the
desired item appears.
Each time you press (2) (SET UP), the item
changes as follows:
CLOCK n BEEP n RM n M.DSPL n A.SCRL*
* When no MD is playing, this item will not
appear (XR-C5200 only).
3
Press (4) (n) to select the desired
setting (Example: ON or OFF).
4
Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.
Note
If the "SFT" indication appears, press (SHIFT) to
complete the mode setting.
12

Boosting the bass sound

— D-bass

You can enjoy a clear and powerful bass
sound. The D-bass function boosts the low
frequency signal with a sharper curve than
conventional bass boost.
You can hear the bass line more clearly even
while the vocal volume remains the same. You
can emphasize and adjust the bass sound
easily with the D-BASS control.
0dB
Frequency (Hz)
Adjusting the bass curve
Turn the D-BASS control to adjust the
bass level (1, 2, or 3).
"D-BASS" appears in the display.
To cancel, turn the control to OFF.
Note
If the bass sound becomes distorted, adjust the
D-BASS control or volume.
D-BASS 3
D-BASS 2
D-BASS 1