Disposal; Accessories; Warranty; Eu Declaration Of Conformity - Festool VAC SYS VP Instrucciones De Servicio

9

Disposal

Do not throw the power tool in your house-
hold waste! Dispose of the machine, acces-
sories and packaging at an environmental-
ly-responsible recycling centre! Observe the
valid national regulations.
EU only: European Directive 2002/96/EC
stipulate that used electric power tools must
be collected separately and disposed of at
an environmentally responsible recycling
centre.
10

Accessories

Use only original Festool accessories and
Festool consumable material intended for
this machine because these components
are designed specifi cally for the machine.
Using accessories and consumable material
from other suppliers will most likely affect
the quality of your working results and limit
any warranty claims.
Machine wear or your own personal workload
may increase depending on the application.
Protect yourself and your machine, and pre-
serve your warranty claims by always using
original Festool accessories and Festool con-
sumable material!
The order numbers of the accessories and
tools can be found in the Festool catalogue or
on the Internet under "www.festool.com".
11

Warranty

For our tools, we give warranty for material
and production defects in accordance with
the locally applicable legal provisions, but in
any case for at least 12 months. Within the
EU member states, the warranty period is
24 months (verifi cation through invoice or
delivery note).
Damage caused by the operator, natural
wear, overloading, incorrect handling or
through the use of the equipment not spe-
cifi ed in the operating manual, or damage
which was known at the time of purchase, is
not covered by the warranty. Furthermore,
damage caused by the use of non-original
Festool accessories and consumable ma-
terial (e.g. sanding pads) is also excluded.
Complaints can only be recognised if the
tool is returned while still assembled to the
supplier or an authorised Festool Customer
Service workshop. Keep the operating ma-
nual, safety instructions, spare parts list and
purchase receipt in a safe place. Otherwise
the respective, current warranty conditions
of the manufacturer shall apply.
Note
Due to continuous research and develop-
ment work, we reserve the right to make
changes to the technical content of this
documentation.
12 Declaration of Conformity
We declare under sole responsibility that this
product complies with the following norms
or normative documents:
EN 60204, EN 1012, EN 292, EN 61000
in accordance with the regulations sti-
pulated in Directive 98/37/EC (until
28.12.2009), 2006/42/EC (from 29.12.2009),
2004/08/EC.
Dr. Johannes Steimel
Head of research and development
Festool GmbH, Wendlingen, Germany
12