Intended Use - Dometic GROUP Waeco CoolFun Serie Instrucciones De Uso

Intended use

CAUTION!
!
 Before starting the device, ensure that the power supply line
and the plug are dry.
NOTICE!
A
 Do not use electrical devices inside the cooler unless they are
recommended by the manufacturer for the purpose.
 Do not place the device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
 Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the
heat that arises during operation does not build up. Make sure
that the device is sufficiently far away from walls and other
objects so that the air can circulate.
 Ensure that the ventilation openings are not covered.
 Do not fill the inner container with ice or fluid.
 Never immerse the device in water.
 Protect the device and the cable against heat and moisture.
3 Intended use
The cooling device can be used to cool (CX26, CXT26, CX30) and keep
foodstuffs warm (only CX30). It is possible to change between the heating
and cooling operation by means of a switch (only CX30).
The device is designed to be operated from a 12-Vg on-board supply socket
of a vehicle (e.g. cigarette lighter), boat or caravan (CX26, CXT26, CX30) as
well as from a 230 Vw AC mains (CX30).
The cooling device is intended to be used in household and similar
applications such as
 staff kitchen areas in shops, offices and other working environments
 farm houses
 clients in hotels, motels and other residential type environments
 bed and breakfast type environments
 catering and similar non-retail applications
The appliance may also be used for camping use. The appliance shall not to
be exposed to rain.
20
CoolFun CX26, CXT26, CX30
EN