Controls And Indicators - Trotec BC 20 Manual De Instrucciones

MIN/MAX function
Only the minimum or maximum value is shown in the
display during continuous measurements. This measu-
rement function makes it easier for you to determine
peak values.
Press the „MIN/MAX" (3) button to activate this function.
The active function is indicated in the display by „MIN"
or „MAX". To deactivate this function, depress the „MAX/
MIN" button (3) for two seconds.
°C /°F measuring functions
Button (4) for switching over the display units can be
used to determine the display of the second measuring
value in addition to relative humidity. Each time the but-
ton is pressed, the display switches between the follo-
wing display values:
°C Displays the temperature in degrees Celsius
°F Displays the temperature in degrees Fahrenheit
Wet bulb temperature
Dew point temperature
B - 5

Controls and indicators

1) Humidity and temperature sensor
2) LCD display
3) Min/Max button
4) Button for switching over the display unit
5) ON/OFF button
6) Button for Hold function and display lighting
7) Battery compartment on rear
Operating manual – humidity & temperature meter Bc20
G