EUROM CK2003T Manual De Instrucciones página 12

21. Close supervision is necessary when the product is used near children or incapacitated persons. Do not let children use
the appliance as a toy. This appliance is not suitable to be operated by children or persons who have physical, sensory
and/or mental limitations, or by persons who have no knowledge of, or experience with, this appliance.
22. Keep the heater clean. Dust, dirt and/or a build up of deposits in the heater are a common cause of overheating. Make
sure these deposits are removed regularly.
23. Do not turn on the appliance if you have discovered damage to the appliance itself, the cord or the plug, if the appliance
is malfunctioning, if it has been dropped or if there are any other signs of a defect. Return the complete product to the
vendor or to a certified electrician for inspection and/or repair. Always ask for the original parts.
24. Do not use attachments and/or accessories that have not been recommended or supplied by the manufacturer.
25. The appliance (incl. cord and plug) may only be opened and/or repaired by properly authorised and qualified persons.
26. Only use this heater for its intended purpose and as described in this instruction manual.
Not abiding by instructions 24, 25 and 26 may lead to damage, fire and/or personal injuries. A failure to adhere to these rules
also immediately nullifies the guarantee and vendor, importer and/or manufacturer do not take responsibility for any of the
consequences!
Description, Composition and Installation
Remove all packaging material and keep out of reach of children. After removing packaging, check the appliance for
damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not use the appliance, but contact
your vendor for inspection or replacement.
This heater can be used as a free-standing unit or may be mounted on the wall. Both options require some specific
preparatory work.
Do not use the heater before it has been installed in accordance with the following instructions!
Free-standing (as a portable heater):
Attach the feet supplied to the underside of the heater (see picture):
Turn the heater upside down. Place a blanket (or something similar) under the heater to prevent damage!
Slide the feet into place on the sides, exactly along the gaps. This will ensure that the threaded holes will align correctly.
Securely attach the feet to the heater using the self-tapping screws.
Return the heater to the upright position.
Make sure a working heater is always placed on a solid, flat and horizontal surface. Deep-pile carpeting is unsuitable!
Mounted (secured to a wall):
Choose a solid, flat and completely vertical wall made of non-flammable and non-melting material on which to mount the
heater (i.e. no wood, synthetic materials, etc!)
1 – air outlet grill heater
2 – handle
3 – thermostat dial
4 – pilot light
5 – mode selector dial
6 – fan switch
7 – base
8 – air intake grill (underside)
12