Assembly; Instructions For Use; Electrical Connection - Proficook PC-MCM 1024 Instrucciones De Servicio

Assembly

Attach the mixing jug
Place the mixing jug onto the base unit. Pay atten-
tion to the symbols while doing so. The marking on
the mixing jug beneath the handle and the marking
on the base unit have to be precisely aligned one
above the other.
Put the lid on
1. Place the lid onto the mixing jug so that the latch
with the lock is situated on the right beside the
handle.
2. Twist the lid clockwise up to the stop. The lock
must sit securely in the handle of the mixing jug.

NOTE:
Incorrect assembly will prevent the appliance from
being operated.

Instructions for use

Electrical connection

1. Check if the mains voltage that you want to use
matches the one of the appliance. You will find
the information about this on the rating plate.
2. Only connect the appliance to a properly
installed earthed socket. You will hear a beep
when the appliance is assembled correctly
together with the lid.
Functionality of the appliance
• The appliance is operated either with the power
control or with the function buttons.
• Each push of a button is confirmed with a beep,
if the appliance has been turned on with the
POWER button.
• With the power control you will set the mixing
speed. Always start with the lowest speed (Set-
ting 1) if the jug is filled to its maximum capac-
ity. The function of the power control will be
disabled if you use a program with the function
buttons.
• With the function buttons you will be able to
heat, cook and puree dishes. Use the HIGH,
60
MEDIUM, or LOW buttons for the heating func-
tion. You can stir the dish with the PULSE but-
ton. The cooking time can be changed at minute
intervals with the and buttons. The function
buttons will be disabled if you have turned on
the appliance with the power control.
Turning on / off
Press the POWER button. The indicator light will
flash. The appliance will be in standby mode.
Turning on / off with the power control

NOTE:
The appliance can only be turned on when the
mixing jug is closed with the lid and when the
power control is set to 0.
• Turning on: Turn the control clockwise to the
desired speed setting.
Setting 1 =
Setting 2 =
Setting 3 =
Setting 4 =
• Turning off: Turn the control anti-clockwise to
0.
Turning on / off with the function buttons HIGH,
MEDIUM, LOW
• Turning on: Press the relevant button once.
The indicator light in the selected button will light
up.
• Turning off: Press the button once more. The
indicator light will go out. The appliance will be
in standby mode. Then press the POWER but-
ton.
Function button PULSE
As long as you keep this button pressed down, the
appliance will run at speed setting 2.
Display
The appliance has a display on which you can
read the remaining time of the cooking program in
minutes and seconds.
low speed
medium speed
high speed
top speed